How to Measure Hips & Waist-to-Hip Ratio

Key Takeaways
- Hip circumference is measured at the widest part of your buttocks, seen from the side. It is not at your hip bones.
- Waist-to-hip ratio (WHR) = waist ÷ hips. Use the same unit for both.
- WHO flags substantially increased metabolic risk at a WHR of 0.90 or more in men and 0.85 or more in women.
- WHR describes fat distribution: whether weight sits around the middle (“apple”) or the hips and thighs (“pear”).
- WHR can mislead after weight loss or muscle gain around the hips. Pairing it with a height-based measure such as BRI gives a fuller picture.
What Hip Circumference Tells You
On its own, hip size says little about health. A large hip measurement can reflect muscle in the glutes, a wide pelvis, or fat stored on the hips and thighs. Its real value is as a reference point for your waist.
Fat stored around the hips and thighs (gluteofemoral fat) behaves differently from abdominal fat and appears to be metabolically less harmful. When the waist is large relative to the hips, more fat is stored centrally, the pattern most closely linked to type 2 diabetes and cardiovascular disease. That relationship is what waist-to-hip ratio captures.
What You Need
- A flexible, non-stretch tape measure
- A full-length mirror, or better, a second person
- Thin, close-fitting underwear (no bulky seams, pockets or shapewear)
Hip measurements are harder to take on yourself than waist measurements, because you can’t see the back of the tape and the widest point is behind you. If possible, ask someone to help.
Step-by-Step: How to Measure Your Hips
- Stand straight with your feet together and your weight evenly balanced. Feet apart makes the reading smaller, because the buttock muscles flatten.
- Relax your glutes. Clenching changes the shape of the buttocks and the reading.
- Turn sideways to the mirror and find the point where your buttocks stick out the most. That level is your measuring site. WHO and US military protocols both define the hip site this way: the maximum circumference over the buttocks.[1][2]
- Wrap the tape around your hips at that level, over the most prominent part of the buttocks at the back and across the front of your hips and pubic area.
- Check in the mirror that the tape is level all the way around. It tends to ride up at the back.
- Keep the tape snug but not compressing. It should lie flat without denting the skin or clothing.
- Read to the nearest 0.5 cm (or ¼ inch), then remove the tape and repeat. Average two readings that agree within 1 cm.
Order matters if you’re doing both: WHO’s survey protocol takes the waist first and the hips immediately afterwards, in the same standing position.[1] Our waist circumference guide covers the waist step in detail.
Hip Measurement: Men vs Women
For men
- The widest point is usually lower than men expect, often around the bottom third of the buttocks rather than at the belt line.
- Men with little fat on the hips often have a hip reading close to their waist reading. That pushes WHR towards 1.0 even in fairly lean men with an athletic, straight build. That isn’t necessarily a sign of risk, which is one reason to interpret WHR alongside other measures.
For women
- The widest point can sit at the buttocks, the upper thighs or the hips, depending on body shape. Use the side view to find the true maximum. Moving the tape up and down a few centimetres and noting the largest reading is a reliable technique.
- Shapewear, thick leggings and jeans can change the reading by several centimetres. Measure over thin underwear.
- Pregnancy and the postpartum period change pelvic and abdominal shape, so WHR cut-offs don’t apply during this time.
- If you’re also measuring for clothing, note that the fashion “hip” measurement is the same site (the fullest part of the hips and seat), so a single measurement serves both purposes.
How to Calculate Your Waist-to-Hip Ratio
WHR = waist circumference ÷ hip circumference
Use the same unit for both numbers. Centimetres and inches give an identical ratio.
Worked examples
| Person | Waist | Hips | WHR | WHO interpretation |
|---|---|---|---|---|
| Man | 92 cm | 100 cm | 0.92 | At or above the 0.90 threshold: substantially increased risk |
| Woman (measured at waist midpoint) | 78 cm | 98 cm | 0.80 | Below the 0.85 threshold |
| Same woman (waist measured at iliac crest) | 84 cm | 98 cm | 0.86 | Above the 0.85 threshold |
The last two rows are the same woman. Changing only where the waist was measured moved her across the threshold. WHO’s cut-offs were developed mainly with waist measured at the midpoint between the lowest rib and the top of the hip bone,[1] so use that site when you compare yourself against them.
What Is a Healthy Waist-to-Hip Ratio?
The cut-offs most widely cited come from the World Health Organization:[1]
| Lower risk | Substantially increased risk | |
|---|---|---|
| Men | below 0.90 | 0.90 or above |
| Women | below 0.85 | 0.85 or above |
Some caveats apply:
- Ethnicity. These cut-offs were derived largely from European-origin populations. Optimal thresholds differ in some Asian, African and Latin American populations, and WHO acknowledges that “the challenges in identifying cut-offs for international guidelines should not be underestimated.”[1]
- Age. WHR tends to rise with age in both sexes as fat redistributes towards the abdomen, especially in women after menopause.
- They are screening values, not diagnoses. A WHR above the cut-off is a reason to look closer, not a verdict.
Waist-to-Hip Ratio vs BRI vs Waist-to-Height Ratio
All three use a tape measure and try to capture abdominal fat. They differ in what they compare your waist with.
| Measure | Formula | Strength | Weakness |
|---|---|---|---|
| Waist-to-hip ratio | waist ÷ hips | Captures fat distribution (apple vs pear) | Can change misleadingly if you lose or gain fat or muscle on the hips |
| Waist-to-height ratio | waist ÷ height | Simple; NICE threshold of 0.5 for everyone[3] | Doesn’t distinguish body shapes |
| Body Roundness Index | geometric model using waist and height | Strongly associated with visceral fat in research | Requires a calculator |
One limitation of WHR is worth understanding. If someone loses fat from both waist and hips at a similar rate, their WHR barely moves, even though their health risk has genuinely improved. Height doesn’t change in adults, so height-based measures like BRI and waist-to-height ratio track abdominal fat loss more directly. For a broader comparison, see our guide to BRI vs BMI.
Common Mistakes When Measuring Hips
- Measuring at the hip bones. The bony points at the front of your pelvis are not your hip measurement site. Go lower, to the widest part of the buttocks.
- Feet apart. This flattens the glutes and shrinks the reading.
- Tape riding up at the back. It’s the most common error when measuring yourself.
- Measuring over jeans or pockets. These can add 2–4 cm.
- Not finding the true maximum. Slide the tape up and down slightly and keep the largest reading.
Frequently Asked Questions
Where exactly are your hips for measuring?
At the widest part of your buttocks, viewed from the side. Sewing guides often put it roughly 18–23 cm (7–9 in) below the natural waist. Body shape varies too much for that to be reliable, so always find it visually.
Is a waist-to-hip ratio of 0.8 good for a woman?
A WHR of 0.80 is below WHO’s 0.85 threshold for women, so it isn’t associated with substantially increased metabolic risk. It is only one indicator, though. A low WHR alongside a large waist (for example, if both waist and hips are large) can still warrant attention.
Is a waist-to-hip ratio of 1.0 bad for a man?
A WHR of 1.0 is above WHO’s 0.90 threshold for men. In most men it points to excess abdominal fat. In very lean, muscular men with narrow hips, it may partly reflect body build, so check it against your waist size and a height-based measure like BRI.
Can I improve my waist-to-hip ratio?
Yes, mainly by reducing abdominal fat. Evidence-based approaches include regular aerobic exercise, resistance training, adequate sleep and reducing alcohol and ultra-processed foods. Our article on how to lower your BRI covers strategies that also improve WHR.
Should I measure hips in centimetres or inches?
Either, as long as waist and hips use the same unit. The ratio is identical.
References
WHO: Waist circumference and waist–hip ratio: report of a WHO expert consultation, Geneva, 8–11 December 2008. World Health Organization, 2011. who.int
WHO STEPS Surveillance Manual: physical measurements section (waist and hip circumference protocol). who.int
NICE guideline NG246: identifying and assessing overweight, obesity and central adiposity. nice.org.uk
Self-measured hip circumference reliability: “Reliability and criterion validity of self-measured waist, hip, and neck circumferences.” BMC Medical Research Methodology. 2016. PMC4855335
Related Articles
- How to Measure Waist Circumference Correctly: the other half of WHR
- How to Take Body Measurements: Complete Guide: a full measurement routine
- How to Measure Body Fat With a Tape Measure: uses your hip measurement (women)
- Visceral Fat and BRI: why abdominal fat matters most
Check Your Body Shape Score
Waist-to-hip ratio tells you about fat distribution. To see how your waist compares with your height, enter your measurements into our free BRI calculator. Everything is calculated privately in your browser.